Sunscreen Roller Blinds are designed primarily for UV protection and glare. 10% Sunscreen is the most open weave, it is a good option to consider when maintaining a view is important but it is slightly less private than the other options. We find people who would like to be able to see out clearly will opt for this range.
Sunscreen Roller Blinds offer daytime privacy, as it gets darker outside, if you have the lights on inside, you will no longer have privacy. If you need daytime and nighttime privacy, consider making this blind a Double Roller Blind by ordering in combination with a Blockout Roller Blind.
If you require a Sunscreen wider than 3000mm look into our Single Linked Roller Blind option.
13/08/2024 IMPORTANT
Uniview 10% now has a 2x2 weave construction instead of 1x1 weave construction. The 1x1 is being phased out and replaced with 2x2. The change was made by Uniline Australia to make blinds wider than 2400mm more UV stable. The difference is most noticeable on multi coloured weaves e.g. White/Grey as an example. The reason this is important is because you may already have used 10% in the old style weave and the new stock will vary to the old stock and we have no control of that. We have stock of the original 1x1 weave and the new 2x2 weave depending on the colour. If we run out of 1x1 old style in a colour it can only be replaced with 2x2 new style.
Sunscreen Blinds can be motorised with our rechargeable lithium battery motors or hard wired with our 240 Volt electric motors.
The size you order is the bracket to bracket size. A standard 33mm deduction is taken of the width of the fabric to ensure blind will fit.
Lighter colours (whites) are harder to see through in direct sunlight in comparison to darker colours (charcoals).
Sunscreen Blinds use a 56mm x 70mm bracket but require 70mm recess for a flush fit.